GGG-T-2761
5 June 1991
SUPERSEDING
MIL-T-82009B(YD)
18 May 1984
FEDERAL SPECIFICATION
TONGS, MATERIAL LIFTING, PIPE
This specification is approved by the Commissioner, Federal
supply Service, General Services Administration, for the use
of all Federal agencies.
SCOPE
1.
1.1 Scope. This document covers two classes of metal tongs for lifting
materials such as pipe and conduit.
1.2 Classifica tion. Unless otherwise specified (see 6.2), tongs are of the
following classes and sizes. When specified (see 6.2), liners for tongs are to
be provided for handling pipe of outside diameter (od) as specified (see 6.2).
Class I - Cast aluminum
Class II - Steel
Size
4
-
For
use
with
4-1/2 inch od pipe
6-5/8 inch od pipe
Size
6
-
For
use
with
-
FOr
use
with
Size
8
8-5/8 inch od pipe
Size
10
-
For
use
with
10-3/4 inch od pipe
Size
12
-
For
use
with
12-3/4 inch od pipe
2.
APPLICABLE DOCUMENTS
2.1
Government documents.
2.1.1 Specifi cations and standards. The following specifications and
standards form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the issue
of the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions] and any pertinent
data which may be of use in improving this document should be addressed to:
Commanding Officer (Code 156), Naval Construction Battalion Center, Port
Hueneme, CA 93043, by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
FSC 3940
Approved for public release, distribution iS
DISTRIBUTION STATEMENT A.
unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business